Rampage Xb Gas Powered

Rampage Xb Gas Powered Review

Rampage Xb Gas Powered Feature

• Gas 30cc HY 2 Stroke Motor
• 4mm Aluminum 6061T6 Chassis
• Dual Disc Brakes
• 500cc Fuel Tank Capacity
• 2.4GHz Radio System

Rampage XB 1/5 Scale Buggy Experience the size and power of the Redcat Rampage XB Buggy. With a 30cc gas powered 2-stroke engine, tuned exhaust, steel gears and more, this petrol powered buggy is sure to get your adrenaline going fast.

King Motor Baja T1000 30.5cc 1/5 Scale Gas / Petrol Powered RC Remote Control Desert Truck 1:5

King Motor Baja T1000 30.5cc 1/5 Scale Gas / Petrol Powered RC Remote Control Desert Truck 1:5 Review

One of the finest radio-control vehicles ever produced has just been upgraded. This 1:5 scale, ready-to-run off-roader is manufactured with extreme attention-to-detail by King Motor Sport and now includes an advanced chrome-tuned pipe for a 1HP gain. An amazing 37 inches in length, the fully assembled Baja Racing Truck comes equipped with a 2-stroke, 30.5cc engine that is capable of reaching speeds of 55+ mph. This vehicle features a redesigned 2.4-GHz LCD computerized radio system with built-in fail safe for better control and range, along with a high-torque 33 kg/cm steering servo and 15 kg/cm throttle servo for improved steering and speed. This huge 29-pound truck is loaded with fully-adjustable VVC shocks, an 8,000-RPM clutch spring, an adjustable carburetor, and off-road knobby dirt tires. The all-metal differential gears transfer the 30.5cc engine's massive power directly through the drive train with very little loss, while the aluminum chassis keeps weight in check and minimizes body roll. All that is required to get you on the race track is 2-cycle oil, unleaded gas, and 8-AA controller batteries. Additional specifications: 2-wheel drive; double-wishbone suspension; 22.5" wheelbase; off-road tires; and 3-piece nylon rims. The complete King Motor T1000 Baja Racing Truck includes a fully assembled truck, sticker set, 2.4-GHz LCD radio controller and receiver, spare parts bag, mixing bottle, 8-piece tool kit, battery charger (110v plug), receiver battery pack, spare air filter, owner's manual / schematics, whip antenna, and chrome-tuned pipe.

Go-Ped GTR46i Trail Ripper Interceptor Gas Powered Full Suspension Off Road Scooter

Go-Ped GTR46i Trail Ripper Interceptor Gas Powered Full Suspension Off Road Scooter Review

Go-Ped GTR46i Trail Ripper Interceptor Gas Powered Full Suspension Off Road Scooter Feature

• Please contact the manufacturer for a service guarantee 775-783-9374.
• This item cannot be returned.

Following the successful introduction and growth of the CIDLI suspension-equipped Go-Peds--including the Trail Ripper, Riot, and Trail Ripper Quad--Patmont Motor Werks (PMW) reintroduces the legendary Go-Ped Interceptor. The off-road scooter, redubbed the GTR46i, is equipped with the same impressive chassis and high-performance components as its older brothers, but with a few variations, including a quieter exhaust system, smooth-riding AT Primo Duro Trap tires, higher maximum speeds, better fuel economy, and a new kickstand. The modifications make the GTR46i ideal for people who want to experience the type of plush ride on trails and unpaved surfaces that comes only from the race-proven CIDLI suspension system. This powerful scooter is designed to please even the heaviest of Go-Ped riders who understand the requirements of an adjustable/tunable racing-style engine and carburetor.

Specifications:

• Engine model: GP460RS
• Engine description: Single cylinder, 2 stroke, air cooled
• Engine displacement: 45.7cc
• Engine power: 4.5 horsepower
• Engine ignition: Electronic
• Engine cutoff: Handlebar kill switch
• Carburetion: Walbro
• Transmission: Centrifugal clutch/chain drive
• Drive: Live axle
• Fuel: Gas and 2-cycle oil @ 25:1
• Fuel capacity: 1.5 liters
• Max speed: 30 mph
• Handlebar: Reinforced 6061-T6 aircraft aluminum and motorcycle-style handlebars
• Frame: Extreme-duty, aircraft-quality 4130 Chromyl frame
• Fork: Patented, cantilevered, aircraft-quality 4130 Chromyl fork
• Front suspension: 6-inch travel CIDLI adjustable suspension with anti-drive geometry
• Rear suspension: 6-inch travel CIDLI adjustable suspension
• Capacity: 400 pounds
• Tires: 10-inch Powerplay "TT"
• Rims: Magnesium
• Front brake: Mad Dog disc braking system
• Rear brake: Mad Dog disc braking system
• Folding: Folding handlebar for easy storage
• Additional features: Motorcycle-style racing handlebars, pro clamp, pro brake lever, pro grips, side stand
• Dimensions: 47 by 44 by 24 inches (W x H x D); 47 by 24 by 24 inches folded
• Weight: 46 pounds

Introducing the GTR46-Interceptor (GTR46i)

Following the very successful introduction and incredible growth of the CIDLI suspension equipped Go-Peds (Go-Ped Trail Ripper, Riot and Trail Ripper Quad), PMW is proud to continue extending this great line by reintroducing the legendary Go-Ped "Interceptor" as the new GTR46i.

Due to many requests from customers, PMW now provides a street racing version of the GTR46R designated as the GTR46i.

This very high performance Go-Ped has the same impressive chassis with high performance "Interceptor" components as its amazing older brothers , but with the following variations:

New quieter exhaust system
Smooth ride AT Primo Duro Trap aggressive treaded street tires as came stock on the "Interceptor"
Higher speed, better fuel economy, quieter GSR46R 6-76 sprocket drive ratio
New kickstand
These modifications make the GTR46i perfect for those that want to experience the fully suspended plush ride on paved and unpaved surfaces that comes only from the race proven and patented CIDLI suspension system.

This powerful scooter will please even the heaviest of Go-Ped riders that understand the requirements of an adjustable/tunable racing style engine and carburetor.

Engine: 45.7cc air-cooled single-cylinder two-stroke
Max Speed: 30mph
Transmission: Chain: #25 heavy duty, non o-ring / Spocket Ratio: 6:76
Tires: Smooth ride AT Primo Duro Trap aggressive treaded street tires
Brakes: Front/Rear Brakes: 5.5in hardened SS disc with Maddog mechanical caliper
Suspension: Front: 6in travel CIDLI adjustable suspension with anti-dive geometry
Rear: 6? travel CIDLI adjustable suspension

California Air Resource Board Legal: N
Color: Synister Black (flat)
capacity: 400lbs

Go-Ped Gas Powered Full Suspension 4-Wheeled Trail Ripper Quad

Go-Ped Gas Powered Full Suspension 4-Wheeled Trail Ripper Quad Review

Go-Ped Gas Powered Full Suspension 4-Wheeled Trail Ripper Quad Feature

• 4-wheeled trail quad vehicle with 10 inches of suspension travel
• 4.5-horsepower Go-Ped racing engine with max speed of 28 to 30 mph
• Go-Quad 2-wheel drive and rear axle "Mad Dog" disc braking system
• Fold-down seat for easy access to motor and gas tank
• Measures 49 x 25 x 39 inches (W x H x D) and weighs 80 pounds

Outfitted with the same patented CIDLI suspension system found on the GTR46R, the Go-Ped four-wheeled Trail Ripper Quad offers an amazing 10 inches of suspension travel on all four of its knobby tires. As a result, the four wheeler delivers an unsurpassed off-road experience, so you can rip down the trail quickly and safely. The Trail Ripper Quad also includes a 4.5-horsepower GP46ORS Go-Ped racing engine, which delivers a maximum speed of 28 to 30 miles per hour--plenty fast enough for your trail needs. Other features include a Go-Quad two-wheel drive/braking system, a fold-down seat for easy access to the motor and gas tank, and a centrifugal clutch/chain drive transmission.

Specifications:

• Engine model: GP460RS
• Engine description: Single cylinder, 2 stroke, air cooled
• Engine displacement: 45.7cc
• Engine power: 4.5 horsepower
• Engine ignition: Electronic
• Engine cutoff: Steering wheel kill switch
• Carburetion: Walbro
• Transmission: Centrifugal clutch/chain drive
• Drive: Live axle
• Fuel: Gas and 2-cycle oil @ 25:1
• Fuel capacity: 1.5 liters
• Max speed: 28 to 30 mph
• Handlebar: Includes throttle, brake, kill switch, and adjustable steering
• Frame: Extreme-duty, aircraft-quality 4130 Chromyl frame
• Front suspension: Independent 10-inch travel CIDLI suspension
• Rear suspension: 10-inch travel CIDLI suspension
• Capacity: 400 pounds
• Tires: 11-inch Badlands knobby tires
• Rims: Magnesium
• Front brake: N/A
• Rear brake: Full rear axle "Mad Dog" disc braking system
• Folding: Folding seat for easy access to gas tank and engine
• Dimensions: 49 by 25 by 39 inches (W x H x D)
• Weight: 80 pounds

Description:
Highest Off-Road Fun Factor Rating
The TRQ46 is the latest innovation from the PMW Skunk Werks who extended the application of the patented CIDLI suspension system found on the GTR46R to the 4 wheel Go-Quad line. The Trail Ripper Quad has an amazing 10in of suspension travel at all 4 of its knobby tires. By combining the popular Go-Quad 2 wheel drive / braking system, the TRQ46 is a never before seen product designed to provide the highest off-road fun, thrills and safety bang for the buck. Very compact and equipped with the new GP460RS Go-PEd race engine, it is the coolest Go-Quad available anywhere for an unsurpassed Off-Road experience.

Specifications:
Suggested Usage Competition
Engine 4.5 HP - 46cc Go-Ped GP460RS Race Engine
Max Speed 28-30
Transmission Centrifugal Clutch / Chain
Weight (lb) 80
Est. Fuel Econ. (mpg) 60
Fuel Tank (liters) 1.5
Tires 11" Off Road Pneumatic
Brakes Disk
California Air Resource Board Legal N
dB (Max RPM) ---
Additional Features Front and rear patented CIDLI suspension system, Oversized knobby tires, magnesium rims, Higher output race engine, 2 wheel drive / braking / live axel, rear disk brake, 10in suspension travel.

Go-Ped GSR46R Gas Powered Competition Scooter (Blue)

Go-Ped GSR46R Gas Powered Competition Scooter (Blue) Review

Go-Ped GSR46R Gas Powered Competition Scooter (Blue) Feature

• Gas-powered stand-up scooter with powerful 4.2-horsepower motor
• Heavy-duty 4130 Chromyl steel frame and double-sided fork
• 10-inch pneumatic tires; 20-inch racing handlebars with pro control levers
• Front and rear Mad Dog disc brakes; top speed of 30 miles per hour
• Supports up to 400 pounds; measures 43 x 44 x 24 inches (W x H x D)

The GSR46R gas-powered competition scooter sets the benchmark for power and speed in the motorized stand-up scooter market. The GSR46R boasts never-before-seen power, stunning speed, and unmatched handling, yet it remains true to the lightweight Go-Ped tradition, weighing in at only 35 pounds. The scooter is powered by the same motor as the fearless Trail Ripper GTR46, with a patent-pending centrifugal clutch chain-drive mechanism that delivers 4.2 horsepower, 2.31 foot-pounds of torque, and a 17,500 redline, providing excellent performance at low and high speeds. Tunable, it can even reach 5.5-plus horsepower and 2.6-plus foot-pounds of torque with the addition of an after-market expansion chamber.

All of Patmont Motor Werks finest racing components come standard with the Go-Ped GSR46R: a heavy-duty 4130 Chromyl steel frame and double-sided fork, pneumatic TT tires mounted on ultra-light, high-impact polymer rims, and 20-inch motorcycle-style "Tim Patmont bend" racing handlebars fitted with a slide tube clamp and pro control levers. The front and rear Mad Dog disc brakes, meanwhile, offer excellent braking performance that's perfectly matched for the power output of the scooter. The scooter is available in four powder-coated colors: gloss black, championship orange, Ferrari red, and Beach Boy blue.

Specifications

• Engine model: GP460RS
• Engine type: Single cylinder, 2 stroke, air cooled
• Engine displacement: 45.7cc
• Engine power: 4.5 horsepower
• Engine ignition: Electronic
• Engine cutoff: Handlebar kill switch
• Carburetor: Walbro
• Transmission: Centrifugal clutch/chain drive
• Frame: Aircraft-quality 4130 Chromyl frame
• Fork: Bothy, aircraft-quality 4130 Chromyl fork
• Fuel: Gas and 2-cycle oil 25:1 mix
• Fuel capacity: 1.5 liters
• Max speed: 30 miles per hour
• Handlebar: Reinforced 6061-T6 aircraft aluminum, motorcycle style
• Wheels: 10-inch pneumatic TT
• Rims: High-impact polymer
• Brakes: Mad Dog disc braking system
• Foldable: Yes
• Max capacity: 400 pounds
• Weight: 35 pounds
• Folded dimensions: 43 by 19 by 24 inches (W x H x D)
• Unfolded dimensions: 43 by 44 by 24 inches (W x H x D)
• Warranty: lifetime warranty on frame and fork

About Go-Ped
Steve Patmont, his wife Hannelore, and their two sons Gabe and Tim launched Patmont Motor Werks (PMW) in 1985, building Go-Ped motorized scooters in their Pleasanton, California, garage for friends and family. Today, Patmont Motor Werks is a world leader in personal transportation, and manufactures its scooters in a much bigger garage--a state-of-the-art 70,000-square-foot production facility in Minden, Nevada. Patmont Motor Werks is constantly building new innovations in the portable transportation market. The company introduced the ESR750 pure electric line in 2003, a zero-emission transportation device for riders who want to reduce their carbon footprint. In 2005, the Patmont family introduced the patented Cantilevered Independent Dynamic Linkless Indispension (CIDLI). The simple yet revolutionary suspension system redefined the portable transportation market once again. Patmont Motor Werks remains family owned, with a dedicated extended family of employees, vendors, authorized dealers, and loyal customers. The Super GSR46R is the fruit of PMW?s excellent experience in building scooting machines that are built for the race track. It boasts never before seen power and stunning speed. Yet, it remains true to the Go-Ped signature characteristic, being light weight as are all other Go-Ped scooters, weighing in at only 35lbs. Specifications:

Engine GP460RS
Engine Type 45.7cc air cooled single-cylinder two-stroke
Bore and Stroke 40mm x 33mm
Carburation Walbro 19mm
Maximum Speed Fastest production scooter in the world
Drive Train Chain Drive / centrifugal clutch
Sprocket ratio 6:76
Chain #25 heavy duty, non o-ring
Frame Patented heavy Duty 4130 Chromoly aircraft quality steel frame
Fork Extreme Duty 4130 Chromoly aircraft quality steel fork - Double Sided
Handlebar 6061-T6 hardened aluminum ? Aircraft Grade, fitted with slide tube clam
Engine Mount Patent pending, combination solid aluminum third bearing/clutch housing with easy chain adjusting and chain guard
Fuel Tank Capacity 1.5 liter - patented
Wheels Pneumatic TT Tires - 10" ultra light Magnesium rims
Brakes Front and Rear Stainless Steel Mad Dog Disc Braking System
Folding Effortless folding feature for easy storage and carrying
Weight 35 lbs.
Additional features Heavy duty rear axle, Unbreakable fender, Idle/Free wheel capable, Motorcycle style racing handlebars, Pro Clamp, Race Engine, Pro Brake Lever
capacity 400lbs

Go-Ped GSR Cruiser Gas Powered City Scooter (Blue)

Go-Ped GSR Cruiser Gas Powered City Scooter (Blue) Review

Go-Ped GSR Cruiser Gas Powered City Scooter (Blue) Feature

• Folding gas-powered scooter perfect for city cruising and commuting
• Max Speed: 24 miles per hour
• Transmission: Chain drive with centrifugal clutch
• Estimated Fuel Economy: 100 miles per gallon
• Dimensions: 34 by 16 by 42 inches (L x W x H); dimensions folded: 34 by 13 by 14 inches (L x W x H)

The larger air-filled tires on the GSR Cruiser make navigating through bumps and chuckholes a snap and the perfect machine for the customer wanting a quiet, reliable, and economical motorized scooter with excellent performance, but also for the beginners wanting an affordable, safe and easy-to-learn powered scooter. The GSR Cruiser is also the perfect machine for motor heads, tinkers, and the aftermarket community, as chassis upgrades and screaming engine mods are widely available for a seemingly endless combination of customizability.

The GSR Cruiser folds up for easy transport and storage.

The fuel efficient, powerful and quiet GPL290 engine provides a smooth yet thrilling acceleration to reach speeds above 21 miles per hour in its stock configuration with enough power to easily propel even the heaviest of operators. The GSR Cruiser frame consists of a single-sided cantilevered 4130 Chromoly GSR chassis with cantilevered 4130 fork. The popular 10-inch pneumatic TT racing tires are on ultralight race proven magnesium rims. Power is delivered to the rear wheel through a centrifugal clutch and chain drive for easy operation, so you can just hop on and pull the throttle. Stopping power comes from the efficient front Mad Dog brake caliper and double ground and hardened stainless steel Wave disc rotor. The rear brake mount is ready for the optional rear brake upgrade for increased stopping power needed on highly modified machines. The folding handlebar is a sturdy 6061 T6 welded "T" bar providing unmatched handling and control so your Go-Ped will take you wherever you need to go.

Specifications:

• Suggested Usage: City cruising
• Engine: 29cc two-stroke
• Max Speed: 24 miles per hour
• Transmission: Chain drive with centrifugal clutch
• Weight: 32 pounds
• Estimated Fuel Economy: 100 miles per gallon
• Tires: 10-inch pneumatic
• Brakes: Disk
• California Air Resource Board: Legal
• Dimensions: 34 by 16 by 42 inches (L x W x H)
• Dimensions Folded: 34 by 13 by 14 inches (L x W x H)
• Frame: 4130 chromoly; lifetime warranty on the frame
• Fork: 4130 chromoly lifetime warranty on the fork
• Handlebars: 6061 T6 aircraft grade aluminum with slightly wider than standard cross bar for better handling
• Suspension: No suspension but the Flexdynamic frame is designed to flex to absorb shock
• Carburator: Non adjustable/maintenance free
• Weight Capacity: 400 pounds

GSR Cruiser After 25 years of building high quality motorized scooters for a wide variety of customers, PMW has now developed what it believes is the perfect machine for a vary large segment of motorized scooter enthusiasts. The larger air filled tires on the GSR Cruiser make navigating through bumps and chuckholes a snap and the perfect machine for the customer wanting a quiet, reliable and economical motorized scooter with excellent performance, but also for the beginners wanting an affordable, safe and easy to learn first powered scooter. The GSR Cruiser is also the perfect machine for motor heads, tinkers, and the after market community, as chassis upgrades and screaming engine mods are widely available for a seemingly endless combination of customizability. The fuel efficient, powerful and quiet GPL290 engine provides a smooth yet thrilling acceleration to reach speeds above 21 mph in its stock configuration with enough power to easily propel even the heaviest of operators. The GSR Cruiser frame is the bullet proof using very successful single sided cantilevered 4130 Chromoly GSR chassis with cantilevered 4130 fork. The popular 10 inch pneumatic TT racing tires are on ultra light race proven magnesium rims front and rear perfecting the package. Power is delivered to the rear wheel through a centrifugal clutch and chain drive for easy operation, just hop on and pull the throttle to Go. Stopping power comes from the very efficient front Mad Dog brake caliper and double ground and hardened stainless steel Wave disc rotor. The rear brake mount is ready for the optional rear brake upgrade for increased stopping power needed on highly modified machines. The folding handlebar is a sturdy 6061 T6 welded "T" bar providing unmatched handling and control so your Go-Ped will take you wherever you tell it to eXpress your freedom.

King Motor Baja 3.0 30.5cc 1/5 Scale Gas / Petrol Powered RC Remote Control Car 1:5

King Motor Baja 3.0 30.5cc 1/5 Scale Gas / Petrol Powered RC Remote Control Car 1:5 Review

One of the finest radio-control vehicles ever produced has just been upgraded. This 1:5 scale, ready-to-run off-roader is manufactured with extreme attention-to-detail by King Motor Sport and now offers the next-generation in pro-series aluminum alloy parts, including shock towers and supports, transmission, clutch housing, front/rear wheel hubs, and rev box. An amazing 32 inches in length, the fully assembled Baja Buggy comes equipped with a 2-stroke, 30.5cc engine capable of reaching speeds of 60+ mph. This off-roader features a redesigned 2.4-GHz LCD FM radio with built-in fail safe for better control and range, along with a high-torque 33 kg/cm steering servo and 15 kg/cm throttle servo for improved steering and speed. This huge 29-pound buggy is loaded with fully-adjustable VVC shocks, an 8,000-RPM clutch spring, an adjustable carburetor, and off-road knobby dirt tires. The all-metal differential gears transfer the 30.5cc engine's massive power directly through the drive train with very little loss. Its aluminum chassis keeps weight in check and minimizes body roll, while a stronger chrome-plated metal roll cage adds protection. The vehicle comes with a clear 4-piece body kit that you can custom paint if desired. All that is required to get you on the race track is 2-cycle oil, unleaded gas, and 8-AA controller batteries. Additional specifications: 2-wheel drive; double-wishbone suspension; 22.4" wheelbase; off-road tires; and 3-piece chrome nylon rims with aluminum bead-locks. The complete King Motor 3.0 Baja Racing Buggy includes a fully assembled buggy, clear body, sticker set, 2.4-GHz LCD FM radio controller and receiver, spare parts bag, mixing bottle, 8-piece tool kit, battery charger (110v plug), receiver battery pack, spare air filter, owner's manual / schematics, whip antenna, aluminum rev box, aluminum upgraded parts, and fail-safe control.

Go-Ped Grow-Ped Kick Scooter (Pink)

Go-Ped Grow-Ped Kick Scooter (Pink) Review

Go-Ped Grow-Ped Kick Scooter (Pink) Feature

• See Description for Full Specifications.

The Grow-Ped is a miniature version of the Know-Ped, designed for the young Go-Ped enthusiast. It is crafted with shorter handlebars and a smaller frame and deck to properly fit the younger rider. For increased safety and stability, The Grow-Ped uses the same size wheels as the Know-Ped. Its cute look and renowned Go-Ped quality construction makes the Grow-Ped the right scooter for children to grow with.

Smithsonian Motor-Works

Smithsonian Motor-Works Review

Smithsonian Motor-Works Feature

• Watch the spark plugs fire
• Watch the valves open and close
• See how the pistons fire
• Watch the belts and fan turn
• Detailed instructions

The Smithsonian Motor Works. Build a real working battery powered 4 Cylinder Model Engine with Real Lights and Sounds. Watch the Spark Plugs Fire and the Valves Open and Close. See how the Pistons Fire with the Correct Timing and Watch the Belts and Fan turn. Includes, Over 100 parts that screw together easily, and detailed instructions.

Revell Visible V-8 Engine 1:4 Scale

Revell Visible V-8 Engine 1:4 Scale Review

Revell Visible V-8 Engine 1:4 Scale Feature

• Hand crank moves pistons
• Rubber fan belt with vinyl ignition wires
• Includes display stand
• Includes screwdriver for construction
• Illustrated assembly instructions

Visible V8 Engine Scale Model Kit. This 1:4 Scale Visible V-8 Engine Plastic Assembly Kit from Revell is the winner of the 2008 Parents Choice Award and Silver Honor - 1995 Doing & Learning Toys. What better way to see how an internal combustion engine works than to be able to see all of the parts move! As you turn the crank, each of the parts move, just like the real thing. The Visible V8 Engine features moving pistons and connecting rods. A hand crank operates the pistons, camshaft rocker arms and valves. The kit includes a rubber fan belt and vinyl ignition wires. A superb educational tool on the inner workings and construction of a V-8 engine! Includes display stand, screwdriver for construction, and Illustrated assembly instructions. No batteries required. WARNING: Keep away from small children. Contains small parts which may be swallowed. This is a skill level 3 model. Recommended for ages 12 and up. Made in China. Features: Hand crank moves pistons Rubber fan belt with vinyl ignition wires Includes display stand and screwdriver for construction Warranty - Details Upon Request - Damaged/Missing Parts Replaced For ages 12 and up 22.2" L x 16.6" W x 4.6" H 3.6 lbs.

Razor E300S Seated Electric Scooter

Razor E300S Seated Electric Scooter Review

Razor E300S Seated Electric Scooter Feature

• Electric scooter with detachable seat for easy cruising and commuting^chain-driven electric motor and super-size deck^Reaches speeds of 15 miles per hour; twist-grip acceleration control^Rechargeable battery offers 40 minutes of continuous use per charge^This item is not for sale in Catalina Island

Fusing the thrill of powered transportation with the latest technology and high-quality materials, the Razor E300S seated electric scooter is ideal for "green" commuters. The E300S is equipped with a super-size deck and frame for riders of all sizes, along with an chain-driven electric motor that reaches speeds of up to 15 miles per hour. As a result, it's a breeze to zip to work in the morning and home in the evening without guzzling gas or contributing to congestion. The scooter also includes a detachable seat for easy cruising and a pair of extra-wide 10-inch pneumatic tires to ensure a smooth ride. Other details include a twist-grip acceleration control, a powerful 250-watt electric motor, and a rechargeable battery that delivers up to 40 minutes of continuous use per charge (the battery requires roughly 12 hours of charge time). The charger and tools are included with the E300S.

The buyer and rider of the E300S scooter are responsible for knowing and obeying all local, state, and federal regulations regarding the riding and use of this scooter. The E300S, which offers a maximum weight of 220 pounds, is appropriate for both older teens (12 years and up) and adults and carries a 90-day warranty.

Features:

• Padded seat for a comfortable ride
• Generously sized deck and frame
• High-performance, quiet chain-drive motor for speeds up to 15 mph
• Twist-grip acceleration control
• Hand-operated rear brake
• Fixed handlebars
• Extra-wide 10-inch pneumatic front and rear tires for smooth ride
• Includes two 12-volt sealed lead acid batteries, battery charger and tools
• Up to 45 minutes of continuous riding per charge
• Battery charge time of 8 hours
• Maximum rider weight: 220 pounds

About Razor
Founded in June 2000, Razor USA, LLC is a privately held company based in Cerritos, California and holds the worldwide rights to the Razor® brand. Home of the wildly popular Razor kick scooter, Razor has other scooters like the E100, E200, and E300--all electric scooters. The cutting-edge line of Razor products also includes the Dirt Rocket, Pocket Mod, Pocket Rocket, Ground Force, a line of electric powered ride-on toys, and a junior line of scooters. Razor also offers an action video--RVM--featuring Team Razor (pro scooter athletes ages 9 to 20, who tour the world participating in demonstrations and competitions). Razor has numerous awards including Toy Industry Association's Toy of the Year, and Toy of the Year honors from TIME, Parents, Parenting, Sports Illustrated for Kids, Nick Jr., and U.S. News & World Report.

Features:

Stylish padded seat for a comfortable ride

Super-sized deck and frame for riders of almost all sizes

High-performance, quiet chain-drive motor for speeds up to 15 mph

Twist-grip acceleration control

Hand-operated rear brake

Folding handlebar mechanism for easy storage and transport

Extra-wide 10" pneumatic front and rear tires for smooth ride

Includes two 12-volt sealed lead acid batteries, battery charger and tools

Up to 45 minutes of continuous riding per charge

Battery charge time of 8 hours

Maximum rider weight: 220 pounds

Safety equipment such as helmet, elbow pads and knee pads is recommended

Measures 41"L x 17"W x 42"H

NOTE: Be sure to check and obey local laws regarding scooter use.

RC Nitro starter kit includes glow plug starter, charger, fuel bottle, wrench for Losi Traxxas HPI XTM AE CEN EXCEED gas radio control car

RC Nitro starter kit includes glow plug starter, charger, fuel bottle, wrench for Losi Traxxas HPI XTM AE CEN EXCEED gas radio control car Review

RC Nitro starter kit includes glow plug starter, charger, fuel bottle, wrench for Losi Traxxas HPI XTM AE CEN EXCEED gas radio control car Feature

• Nitro starter kit includes everything except fuel to get started
• Rechargeable glow starter with charger - no need to keep throwing away alkaline batteries
• Quick pouring fuel bottle with angled neck
• Set of wrenches for adjusting the carb and removing the cooling head
• Cross wrench works with popular hex sizes and has a long reach for removing glow plugs

RC Nitro starter kit includes glow plug starter, charger, fuel bottle, wrench for Losi Traxxas HPI XTM AE CEN EXCEED gas radio control car

1/5th Giant Scale Exceed RC Hannibal 30cc Gas-Engine Remote Controlled Off-Road RC Monster Truck w/ 2.4Ghz TX 100% RTR (COLOR VARIES- SENT AT RANDOM)

1/5th Giant Scale Exceed RC Hannibal 30cc Gas-Engine Remote Controlled Off-Road RC Monster Truck w/ 2.4Ghz TX 100% RTR (COLOR VARIES- SENT AT RANDOM) Review

1/5th Giant Scale Exceed RC Hannibal 30cc Gas-Engine Remote Controlled Off-Road RC Monster Truck w/ 2.4Ghz TX 100% RTR (COLOR VARIES- SENT AT RANDOM) Feature

• GREAT GIFT
• BEST QUALITY AND PRICE
• BEST GAS TRUCK IN THE MARKET
• SHIPS FAST
• TOMS OF FUN

The RTR Exceed RC Hannibal is one of the fastest 1/5Th Scale Monster Truck on the market. The Exceed RC Hannibal has enough power to do a lot of bashing, and jumps. Fold stylish and solid full anodized aluminum chassis. New design solid roll cage protects the inner instruction perfectly. Perfect design and extra width front/rear suspension arm. Powerful engine system with air filter. Full aluminum polished exhaust pipe. Enhanced suspension arm system, solid front/rear shock tower. High quality unleaded Gasoline + Stroke oil mixture to start your engine. The RTR Exceed RC Hannibal is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, slipper clutch, shocks and more are perfect before you even open the kit and with all the top of the line equipments already installed, you don't have to do a thing to get going fast! Exceed RC Hannibal are 98% factory assembled - they come Ready-To-Run and equipped with all the radio gear required. Just a few steps are needed to get your car up and running, such as adding the batteries to the transmitter and receiver, and breaking in the engine. High Quality Radio Gear A high quality super narrowband 2.4Ghz is the new advanced "pistol grip" radio set is included for excellent range and precise control over the steering, throttle and braking. Length: 810 MM 31.88 inch. Width: 600 MM 23.62 inch. Height: 325 MM 12.79 inch. Wheelbase: 570 MM 22.44 inch. Ground Clearance: 55 MM 2.16 inch. Diameter Of Wheel: 178*80 MM Weight: 14.3kg Steering Servo: 20kG-cm Throttle Servo: 13KG-cm Drive Way: Shaft drive Chassis: 4mm thickness Aluminum Drive System: 4WD Differential System: CNC process Metal Gear Gear Ratio: 1:12.6 Receiver battery/Charger: 2000mah, Ni-MH Battery Camber Angel: 0-35Degree R/C Control System: 2.4Ghz Digital Transmitter Engine: 30CC

REMOTE CONTROL RC RADIO CONTROL 1/16 2.4Ghz Exceed RC Blur Nitro Gas Powered RTR Off Road Buggy Fire Yellow (OR COLOR MAY VARY SENT AT RANDOM)

REMOTE CONTROL RC RADIO CONTROL 1/16 2.4Ghz Exceed RC Blur Nitro Gas Powered RTR Off Road Buggy Fire Yellow (OR COLOR MAY VARY SENT AT RANDOM) Review

REMOTE CONTROL RC RADIO CONTROL 1/16 2.4Ghz Exceed RC Blur Nitro Gas Powered RTR Off Road Buggy Fire Yellow (OR COLOR MAY VARY SENT AT RANDOM) Feature

• GREAT GIFT
• BEST QUALITY AND PRICE
• LOADS OF FUN
• FREE STARTER KIT INCLUDED
• SHIPS FAST

The Exceed-RC is reinventing the buggies to a whole new level, a compact much smaller version of the popular 1/10Th scale Forza. The New Exceed-RC 1/16Th Scale BLUR Nitro Gas Buggy is the newest sport model full scale dirt off-road buggy. The Blur is build with aluminum tower and aluminum capped oil filled coil over shocks for optimal baja racing or everyday thrashing. Powering this mini monster is an oversized .07 CXP engine with a wide band transmission, propelling this BLUR buggy to speeds over 45mph. The Excced-RC BLUR is one of a kind and with the mini scale always fascinates hobby operators these days. With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system 4WD with Slipper Clutch Thick 6061 Aluminum Chassis Extra-long Suspension Travel and Oversized, Oil-Filled Shocks Cobra Chrome Wheels and Baja Tires Sport Radio Control System with high speed servos Type: Off-Road Truck Power Type: Nitro Channel: 2 2.4Ghz Transmitter Scale: 1/16 Kit/RTR: Ready to Run Length: 11.0in (280mm) Width: 7.51in (191mm) Height: 4.3 in (110mm) Ground Clearance: 0.7 in (18mm) Drive type: 4WD Wheelbase: 10.8 in (275mm) Width of Wheel F/R: 0.98 in (25mm) / 1.14 in (29mm) Diameter of Wheel: 2.71 in (69mm) Engine: .07 Venom Engine Gear Ratio: 14:1:1 Shocks: Oil Filled/Coilover Shocks 1/16 Scale Painted Lexan Body .07 Vertigo Engine Sport Radio Control System with high speed servos Instruction Manual

Go-Ped Ready to Assemble Super Sport Race Kit

Go-Ped Ready to Assemble Super Sport Race Kit Review

Go-Ped Ready to Assemble Super Sport Race Kit Feature

• Scooter assembly kit with high-quality OEM parts
• Extreme-duty Super Sport race frame and Bothy fork
• Ultra-powerful 2.5-horsepower GPL290 engine
• 1-liter gas tank assembly; X-Ped handlebar system
• Includes all necessary hardware and instructions

Build your own custom scooter with the Go-Ped Super Sport race kit. Bundled with the highest-quality genuine Go-Ped OEM parts, the Super Sport race kit is ideal for riders who love to tinker with existing designs. The kit comes everything you need to get started, including an extreme-duty Super Sport race frame, a powder-coated Bothy fork, an ultra-powerful 2.5-horsepower GPL290 engine, a 1-liter gas tank assembly, and an ultra-heavy-duty X-Ped handlebar system with a steel FTG. Add such features as a drive spindle, integrated brakes and cables, and all the necessary hardware and instructions and you're ready to build a scooter with confidence. Since 1985, California Go-Ped has been handcrafting, in the USA, the highest quality scooters in the World, using aircraft grade materials and the highest quality components. As the Leader in innovation, design and performance California Go-Ped has paved the way for personal transportation by producing light weight, fuel efficient, durable, performance minded and well balanced machines.Includes the new ultra powerful GP290RS Go-Ped Race Engine: 28.5cc - 3.2HP"Today, California Go-Ped is the World Leading and most recognized and trusted Brand in Motorized scootersThis " Super Sport Racer Kit" gives you the opportunity to create your own COMPLETE customized scooter, starting with the highest quality genuine Go-Ped OEM parts.

Razor Dirt Quad Electric Four-Wheeled Off-Road Vehicle (Red)

Razor Dirt Quad Electric Four-Wheeled Off-Road Vehicle (Red) Review

Razor Dirt Quad Electric Four-Wheeled Off-Road Vehicle (Red) Feature

• Miniature electric off-road dirt quad with authentic quad geometry
• High-torque gear ratio provides excellent climbing opportunities
• Variable-speed, chain-driven electric motor is quiet and powerful
• Terrain-tracing droop-travel rear suspension delivers smooth ride
• Recommended for ages eight and older; supports up to 120 pounds; twist-grip throttle acceleration control

Kick up a fuss with the Razor Dirt Quad, a miniature electric off-road quad that's perfect for trail riding. The compact vehicle--which supports up to 120 pounds--offers such features as authentic dirt quad frame geometry, a high-torque gear ratio that provides excellent climbing opportunities, a terrain-tracing droop-travel rear suspension that delivers a smooth ride, shatter-resistant plastic fairings, and a powder-coated tubular steel frame that's durable in all weather conditions. Best of all, the variable-speed, chain-driven motor is both super quiet and powerful, helping you zip up the trail in a hurry without disturbing the locals. As a bonus, the Dirt Quad can store either horizontally or vertically depending on your space.

Key Features:

• Powered by a 350-watt motor
• Reaches speeds up to 10 miles per hour
• High-torque drive train with built-in torque reducer produces incredible off-road and climbing capabilities
• Constructed from shatter-resistant plastic fairings on a powder-coated tubular steel frame
• UL listed; requires 6-volt rechargeable battery and charger, included
• Eight hour charge time provides 40 minutes of riding time
• Terrain-following droop travel rear suspension
• Handlebar steering with hand throttle and brake controls
• Large pneumatic tires
• Rear disc brake, padded seat and front "brush bar"
• Rear carry handle and safety flag
• Dimensions: 50 inches long by 30 inches wide by 20 inches tall
• Maximum user weight capacity: 120 pounds

The Razor Dirt Quad is a miniature electric off-road quad. Authentic dirt quad frame geometry. High torque gear ration provide excellent climbing capabilities. Terrain tracing droop-travel rear suspension for a smooth ride. Shatter resistant plastic fairings and powder coated tubular steel frame for all weather splash-proof durability. Variable speed, chain driven motor for super quiet, yet powerful operation. Space-saving vertical storage capability.

1/10 2.4Ghz Exceed RC Beginner Version .16 Engine Nitro Powered Off Road Buggy COLOR VARIES SENT AT RANDOM

1/10 2.4Ghz Exceed RC Beginner Version .16 Engine Nitro Powered Off Road Buggy COLOR VARIES SENT AT RANDOM Review

1/10 2.4Ghz Exceed RC Beginner Version .16 Engine Nitro Powered Off Road Buggy COLOR VARIES SENT AT RANDOM Feature

• GREAT GIFT
• GREAT QUALITY AND PRICE
• LOADS OF FUN
• READY TO RUN
• INCLUDES STARTER KIT

**THE GAS CAR IS BRAND NEW** Exceed RC 1/10 Nitro Competition Racing Remote Control Car, Complete Kit with Body & Engine along with an 2-Channel Pistol Wheel Remote Control w/ 2 SERVOS !!! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * Product Description: - 2-Channel Pistol Radio System Included - Assembled Chassis - VX16 High-Torque and Pull Start Engine with Carburetor - Equipped with Tuned Pipe and Air Filter - Front and rear Bevel Gear differentials - 4 wheel Shaft-Drive System. - Adjustable Wishbone Suspension - No-flex chassis design for better performance. - Alloy aluminum upper plate and chassis. - Oil-Filled shock absorber. - Disc-shaped brake system. - Front universal joint shaft. - 75 cc fuel pressure tank. - High impact wheels. - High traction radial tires. - Servo saver linkage system. - Stock engine muffler system. PACKAGE INCLUDE: - 1 x BRAND NEW 15CX ENGINE - 1 x PAINTED BODY CHASSIS - 2.4Ghz GUN-STYLE REMOTE CONTRO